Line Identity IP, Host, or Domain

IP address, host name, or domain of the DME.

Total Number Lines

Read-only. The total number of incoming and outgoing lines available depends on your license. See Configure a VC Gateway Stream for line availability.

SIP Call RTSP Port

The default value is 554. This field value should match the value in the RTSP Server Port field under System Configuration > Ports. If the two fields do not match, the SIP Gateway will not function correctly.

Number Incoming Lines

Determines the number of available lines shown on the Incoming Lines page. Total cannot exceed license.

Number Outgoing Lines

Determines the number of available lines shown on the Outgoing Lines pages. Total cannot exceed license.

Activate Incoming Line

Automatically activate newly created incoming lines.

Call Outgoing Line

Automatically call newly created outgoing lines.

Video Resolution

Select from dropdown list. Sets the video encoding resolution (the width and height respectively) of the compressed video stream.

P-Mode

Packetization mode defines the packetization rule for the incoming/outgoing stream. Default = standard. Do not change except as directed.

I-Frame Interval

Video conferencing systems do not send IDR frames although they are typically required for most stream players. This is the frequency at which IDR (Intra Dynamic Refresh) frames are inserted. Default = 5 seconds.

Audio Bit Rate

Select from dropdown: 16K, 32K, 64K.

Log Level

Max Number of Log Files

The maximum number of files allotted for logs.

Max Log File Size

The maximum file size for log files.

Never Hang Up

Do not hang up. If you leave the call connected it will automatically hang up after 720 minutes. Default = disabled.

Incoming Maximum Call Time

Maximum duration for any call after which the system will automatically hang up. Default = 120 minutes.

Outgoing Maximum Call Time

Maximum duration for any call after which the system will automatically hang up. Default = 120 minutes.

Should Register

The session will be registered with a SIP Registration server if present. Default = Enabled.

Audio Welcome Prompt

An audio message ("Welcome to VBrick DME") or chime is played when placing or receiving calls to or from an endpoint. Select the type of welcome prompt preferred. To create a custom prompt, select User Configured. See Create a Custom Audio Chime or Welcome Message for details.

Automatic Record to Rev

Automatically record calls on DME and upload to Rev.

Automatic Record to VEMS

Set auto-record on VEMS Mystro.

VEMS Mystro Address

VEMS Mystro 6.x only. Set default VEMS Mystro IP address or host name for recorded files. If SSL is configured on the VEMS Mystro server, you must use a host name in this URL.

VEMS Mystro User

Set default VEMS Mystro user name.

VEMS Mystro Password

Set default VEMS Mystro password.