Transmit Enable

Check to enable transmit for management SAPs. Default = Enabled.

Group Name

Optional. This parameter is included in the Management SAPs used by VBDirectory. It is used for organizing VBrick devices into groups to simplify use of VBDirectory.

Unit Number

Optional. The appliance unit number (range 0–2147483647) is used to identify each DME in a group.

Retransmit Time

Defines the Management SAP retransmit time.

Time To Live

For Unicast, the number of hops (between routers) for which an IP packet is valid in the network. For multicast the distribution scope of the SAP.

Differentiated Services

Differentiated Services Code Point (DSCP) field in the header of IP packets for packet classification purposes. DSCP replaces the three bit Type of Service byte of the IP header.

See Differentiated Services on the Streaming topic.

IP Address

Defines the Destination IP Address for Management SAPs.

Port

Defines the Destination Port for Management SAPs.

Announce Enable

Enables configuration of the announcement.

Send SAP for Internal IP

Destination IP address of the Multicast Announcement for Stream Announcements. Most commonly for multicast, but can be unicast for direct transmission to, for example, a VEMS Mystro server.

Send SAP for  NAT'ed IP

Send a SAP for the natted IP address configured on the System Configuration > Network page.

IP Address

Actual IP address of the SAP announcement.

Port

Announcement Destination Port.

Transmit Interval

How often the Announcement is transmitted in seconds.

Time to Live

For unicast, the number of hops (between routers) for which an IP packet is valid in the network. For multicast, the distribution scope of the SAP.

Differentiated Services

Value that instructs (capable) routers on how to handle a packet. These are generally quality of service items. This is typically set to all zeros.

See Differentiated Services on the Streaming topic.

Author

Optional author information

Copyright

Optional copyright information