Configure a DME Stream
:
Input and Output DME Streams
:
DME Listener Ports
DME Listener Ports
The following table shows the listeners that are configured by default on the DME. They are used in the differing use case scenarios shown below.
DME Port
Protocol
Description
Where Used
554
RTSP
Auto Unicast Announce (UDP/TCP)
In-3 < RTP Auto Unicast
5544
RTSP
Auto Unicast Announce (TCP)
In-2 < RTP Auto Unicast
1935
RTMP
Push from a Flash encoder, for example a VBrick encoder or an Adobe FMLE.
In-1 < Push (RTMP)