Output Stream Configuration
  
Output Stream Configuration
Flash Push
*To access the Flash Push fields:
1. Navigate to Output Configuration > Flash Push.
Use this page to configure streams that will be pushed to a destination device using RTMP. Possible destinations for Flash push include a Flash server or a CDN (content delivery network) like Akamai or EdgeCast.
This is the preferred protocol for sending streams to another DME. As shown below the number of supported streams depends on the DME hardware you purchased. Note that some fields marked with a trailing (o): these (o)ptional fields may be required at the destination device, for example by a Wowza or other Flash server. See table below for the number of configurable output streams.
 
Field
Description
Stream Name
Name identified on the Multi Protocol input for this stream.
Target Name
Stream name on the destination. When pushing to another DME it is generally easiest to reuse the Stream Name as the Target Name.
Destination IP/Address:Port
The IP address and port number of the destination server.
Application
The application is defined by the destination. For example, when sending to another DME, the string should be live, vbApp, vbrick, or vod. When sending to a CDN, the string will need to be extracted from the publishing URL the CDN gives to you.
An example publish to URL from a CDN such as Edgecast is:
rtmp://fso.dca.A3CD.edgecastcdn.net/20A3CD/HLSTest/vBrick?xZ7q0oCEoQ6hvqp5
Where:
●Target Name = vBrick?xZ7q0oCEoQ6hvqp5
●Destination = fso.dca.A3CD.edgecastcdn.net
●Application = 20A3CD/HLSTest
Emulate (o)
Optional May be required for some destination devices.
swf URL (o)
Optional May be required for some destination devices.
Page URL (o)
Optional May be required for some destination devices.
User Name
Required if client-side authentication is required by the destination server
Password
Required if client-side authentication is required on the destination server
Enable
Use dropdown to enable or disable the stream. All streams are disabled by default.
Status
Read only: Disabled | Streaming | Waiting for Stream (Input source <stream_name> not yet available.)
 
DME Model
Number of Configurable Output Streams
7530
25
7550
35
7570
60