Stream to the DME with RMS 1.6
Stream to the DME with an RTP Auto-Unicast Push
To configure an RMS stream for a DME:
1. Open RMS and enter a destination address on the Broadcast page. In the field enter the unicast IP address of the DME.
2. Change the source port to a legal port number that is unused on the source RMS.
| Note: When entering metadata (e.g. Session Info, Origin E-Mail, etc.) be sure to remove any leading spaces. |
Figure 1. RMS Broadcast Options (Part 1)
Figure 2. RMS Broadcast Options (Part 2)
3. Enter the DME IP Address as the RTSP Address. Enter the DME Auto Unicast destination port as the RTSP port. You can indicate use of the Auto Unicast listener on either the RTP server or the Multi Protocol server by designating the appropriate DME port. The Multi Protocol server (In-2) is recommended. If password security is enabled the RTSP Username and Password must be entered. Enter an . This name will be the stream name for stream redistribution.
4. After starting the session, a live RTP stream will be available in the DME that can be served in a number of ways (see Figure 37). For example, you can reflect the stream as a multicast relay or auto-unicast it to another DME. See
Configure a DME Stream for more information.
Figure 3. RMS/DME Integration
Playback Examples
VEMS Mystro (Live Entered URL) | vbrtsp://172.1.1.1/vbStream1S1 vbhttp://172.1.1.1/vbStream1T1.sdp |
iOS | http://<dme_ip_address>/HLS/<stream_name>/playlist.m3u8 |
Stream to the DME with an RTMP Push
This topic explains how to configure an RMS‑to‑DME stream using an RTMP Push output. This is an alternate improved interface (that requires DME 3.1.1 or higher).
To configure an RTMP Push to a DME:
1. Go to the page and then click and .
2. Click on the icon, highlight , and click .
3. Click on the button, scroll down to , and expand the pane.
4. Configure the , name, and credentials as follows:
Field | Description |
URL | DME IP address in this format: |
Stream | User configurable stream name that will be shown on Monitor > Multi Protocol Connections page and used in a Flash player. |
Username | DME user name from User Configuration > Stream Input Authentication page. |
Password | DME user name from User Configuration > Stream Input Authentication page. |
5. When done click and and the option will be added to the menu as a selectable output option.
